Transistor Tester MG328 Multifunctional Test Inductive Capacitance Pattern M8

Description

Transistor Tester MG328 Multifunctional Test Inductive Capacitance Pattern M8
Item information
- Instrument power supply: 3.7V power supply or direct power supply with micro USB interface
- Using ATmega328 microcontroller.
- 12864 graphic LCD display test results.
- One-button operation, automatically power off.
- Exclusively add power switch to avoid battery drain during storage and shutdown.
- Automatic detection of PNP and NPN bipolar transistors, N, P-channel MOSFETs, JFET FETs, diodes, dual diodes, thyristors, resistors, capacitors, inductors Automatically detect pin definitions.
- Measure the current amplification factor (B) of the bipolar transistor and the on-voltage (Uf) of the emitter junction. Darlington transistors can be identified by high threshold voltages and high current amplification factors.
- The protection diode inside the bipolar transistor and MOSFET can be detected and displayed on the screen.
- Measure the threshold voltage and gate capacitance of the MOSFET.
- Supports two resistance measurement, potentiometer can also measure. If the potentiometer is adjusted to one end, the tester cannot distinguish between the middle and the two ends of the pins.
- The resolution of resistance measurement is 0.1 ohm, and the measured value reaches 50M ohm.
- Capacitance measurement range from 25pf to 100mF (100,000 UF). The resolution can reach 1 pF, and the inductance measurement range is 0.01MH-20H, otherwise it will be displayed as a resistance. If the DC resistance of the inductor is higher than 2100 ohms, it will also be displayed as a resistance.
- Can detect the equivalent series resistance (ESR) of capacitors above 2UF with a resolution of 0.01 ohms. This feature is very important for detecting capacitor performance.
- It can display the symbol of the correct direction for the two diodes, and display the forward voltage drop at the same time.
- LED is detected as a diode, and the forward voltage drop is higher than normal. The dual light emitting diode is detected as a dual diode. At the same time, the LED will flash.
- The time of each test is about two seconds. Only large capacitance and inductance measurement will take a long time.
Package includes
- 1* ESR Meter
- 3*
Alligator clip test lead
Delivery details
- We Ship to Worldwide
- Items will be shipped within 1-5 business day on payment received
- Item are shipped from shenzhen using Airmail, reach most of the countries within 10 to 20
- Delivery time depends on destination and other factors, it may takes up to 20 business days
After sales
- Returns are valid for 60 days
- Damage or affect the second sale will not be returned
- There is no product damage problem, the buyer proposes a return or exchang, the buyer needs to bear the freight
Contact us
- Our working time:
- Beijing time: Monday to Friday 9:00 am to 6:00
- If you send email to us, In our working hours will be resumed within 24 hours
- If you we are not satisfied with the product or service, please contact me and don't give us negative or natural feedback, We must give you a satisfactory solution