MESR-100 V2 Low Ohm Meter MESR-100 ESR LCR Capacitance Ohm Meter Professio A1D4

Description

MESR-100 V2 Low Ohm Meter MESR-100 ESR LCR Capacitance Ohm Meter Professio A1D4
1.It is a series resistor inside capacitor, using 100kHz to remove the impedance 1/(2*pi*F*C).
2.The impedance become small, and we can then measure the true series resistor value.,Using this theory, we can measure the capacitor is bad/ damaged or good in condition.
3.Our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a result we can use it as in circuit test.
4.During repairing TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or .
5. Dual terminal, for fast and easy inspect general capacitor or resistor, a printed ESR table for fast check.
Range Accuracy(After zero, Refresh Time(Manual Mode)
tested with 1,10,100R Auto mode take 0 to 2s, more time
resistor) depends on capacitance value.
0.000 to 1.000R 1%+2Digit -0.4s
1.000 to 10.00R 1%+1Digit -0.4s
10.00 to 100.0R 2%+1Digit -0.4s
Accuracy: Up to 1% (detail on above table)
Wide Measurement Range: Greater than 1uF
High Resolution: 4 digit, or 0.001Ohm @ 1 Ω range
Measuring voltage: Less than -40mV RMS (TESTING VOLTAGE)
External Power: 5V Mini USB
Operating Current: 0.02A
Battery: 2 * AA 1.5V Battery ( included)
Battery Life time: Greater than 80 Hours
size:14.5 * 8 * 3cm
Material:ABS + electronic components
colour:black
Package Contents:
1 * Capacitance Meter
2 * Test Clips
1 * User Manual