-40%

MESR-100 V2 ESR LOW Ohm Meter Capacitor Tester Auto- w/ SMD Clip Probe W4P7

$ 34.45

Availability: 10 in stock
  • All returns accepted: Returns Accepted
  • MPN: Does not Apply
  • External Power: 5V micro USB
  • Accuracy: Up to 1% (detail on above table)
  • Package Weight: Approx 218g / 7.7oz
  • Wide Measurement R-ange: >1uF
  • Battery Life time: >80 Hours
  • Return shipping will be paid by: Buyer
  • Item must be returned within: 30 Days
  • Brand: Unbranded/Generic
  • Battery: 2 * AA 1.5V Battery (not included)
  • Condition: New
  • Refund will be given as: Money Back
  • Item Size: Approx 14.5 * 8 * 3cm / 5.7 * 3.1 * 1.2in
  • Color: Black
  • Type: Ohm Meter
  • High Resolution: 4 digit
  • Operating Current: 0.02A
  • Package Size: Approx 17 * 9 * 5cm / 6.7 * 3.5 * 2.0in
  • Restocking Fee: No
  • ASIN: B08LGT5RCR
  • Item Weight: Approx 139.6g / 4.9oz

    Description

    This MESR-100 V2 auto-ranging capacitor ESR and low Ohm meter measuring from 0.001 to 100.0R, support in circuit testing. Using true 100 KHz sine to measure the ESR value, which is equal to the testing method of capacitor manufacturer.
    Features:
    It is a series resistor inside capacitor, using 100kHz to remove the impedance 1/(2*pi*F*C).
    The impedance become small, and can then measure the true series resistor value.
    Using this theory, can measure the capacitor is bad/ damaged or good in condition.
    Our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a result can use it as in circuit test.
    During repairing TV, LCD, Audio board, etc. can in circuit testing the capacitor is good or not.
    Dual terminal, for fast and easy inspect internal resistance of the capacitor, a printed ESR table for fast check.
    Equipped with a SMD alligator clip for more accurately testing. Copper plating on the surface, which is anti-corrosion and oxidation resistance.
    Specifications:
    Color: Black
    Accuracy(After ,     Refresh Time(Manual Mode)
    tested with 1,10,100R    Auto mode take 0 to 2s, more time
    resistor)            depends on capacitance value.
    0.000 to 1.000R  1%+2Digit             ~0.4s
    1.000 to 10.00R  1%+1Digit             ~0.4s
    10.00 to 100.0R  2%+1Digit             ~0.4s
    Accuracy: Up to 1% (detail on above table)
    Wide Measurement : >1uF
    High Resolution: 4 digit, or 0.001Ohm @ 1 Ω
    Measuring voltage: <~40mV RMS (TESTING VOLTAGE)
    External Power: 5V micro USB
    Operating Current: 0.02A
    Battery: 2 * AA 1.5V Battery (not included)
    Battery Life time: >80 Hours
    Item Size: Approx 14.5 * 8 * 3cm / 5.7 * 3.1 * 1.2in
    Item Weight: Approx 139.6g / 4.9oz
    Package Size: Approx 17 * 9 * 5cm / 6.7 * 3.5 * 2.0in
    Package Weight: Approx 218g / 7.7oz
    Package List: E13872
    1 * Capacitance Meter
    2 * Test Clips
    1 * SMD Clip
    1 * User Manual
    Note:
    The Capacitance Meter is used for testing the internal resistance of the capacitor, not for testing capacitance value.