DPS1200FB power supply breakout board adapter GPU miner remote-on 12V Ethereum

Description

Hi!!
This HP "Common Slot" adapter board provides a high degree of functionality and versatility! It offers a convenient way to power devices the need 12V power such as audio, HAM, and mining rigs!  This board provides an optional 12V (~13 mA) remote power-on capability, as well as remote monitoring and cascade control! This device was NOT designed to directly interface with a micro-controller (such as Arduino, Raspberry Pi, BeagleBone since they can not source 13mA... We have a different board for this!).
Why was this designed?  Well, a couple of our customers build alt coin mining systems - you know, systems that mine Litecoin, Ethereum, and other alt currency. These systems usually have a PC motherboard and power supply that control and power multiple graphics cards, and these graphics cards do the computational mining. Our DPS1200GPU adapter allows system builders to use the high efficiency HP DPS1200 power supply to power the GPU cards. This reduces the overall system cost and improves system efficiency. But Hey - this board can be used by anyone who needs to control any HP Common Slot power supply like the DPS-1200!
Unlike prior versions (and the competition), this board can be remotely activated by +12V (at approximately 13 mA) supplied through a standard PC power supply fan header, or just by manually switching on/off the toggle switch. Additionally, a 2 pin header is now available so you can remotely sense the output voltage, or to supply a control voltage to another DPS1200GPU adapter - YES - You can cascade these supplies with one 12V control signal !
The board has 8 standard PCIe connectors that allow connecting this adapter to a GPU card just by using a standard 6 pin Male to 6 pin Male PCIe cable. Cables are available in a separate listing. Yep, click - click - and it is all hooked up - no more tightening wires down using terminal blocks.
This listing is for the
interface board only
- as seen in the first listing image. All other images are for use and illustration purposes only. You must buy the DPS-1200FB Power Supply (
NOT INCLUDED
), and any cables you need (
NOT INCLUDED
), separately!
About the most common "Common Slot" Power Supply:
The HP "DPS-1200FB A" is a small foot print, high efficiency, 12 Volt Enterprise Server switching power supply (
1.5″ x 7.75″ x 3 1/2″ and weighing in at around two pounds each with a capability to supply 900W (75A at 12V) on 110V. Now THAT’S crazy!)
. It operates on 110 or 220 volts, to provide 900 watts or 1200 Watts respectively. This supply offers a high quality and inexpensive way to power devices requiring 12 volt power such as Bitcoin mining equipment and electronics projects.
This
interface board
is intended for use with HP brand power supplies model number 'DPS-
1200F
B A'.
You can typically buy this supply used for - here on eBay, on Amazon, and from many other sources.
Uses:
- 8 PCIe connector blocks make it simple for connecting and disconnecting to any load.
- Great as a small footprint general purpose high current fixed +12V supply.
- A great HIGH EFFICIENCY power supply for many Mining rigs! Save about 50% on power supply costs compared to buying a standard ATX power supply.
- Great for +12V or +24V Radio Control and Ham Radio projects, and featured extensively in RC and amateur radio forums.
- Since this is a computer server grade supply, it is great for computer projects.
- It can run power hungry video cards and multiple video card systems.
-
Operates at a typical-load efficiency of 89-92% and the DPS-1200FB-1 A is 94% efficient!! (results may vary)
CAUTION:
Before working with, or attaching wires to, this
interface board
, ensure it is disconnected from the supply. Before attaching the interface board to the supply, make sure the switch is in the OFF position and the supply is disconnected from power (un-plugged). It is important to unplug the supply, then the interface board before working on it to avoid causing a short which could damage the supply or cause injury. The supply and
interface board must be operated on a non-conductive surface
to prevent the possibility of causing a short. Full instructions, warnings, and limitations, are provided with each
interface board
.
Interface Board Specifications
:
This adapter has 8 standard PCIe connectors
. Be sure to use the appropriate gauge wire for your application. The interface board was designed and assembled in the US; and parts were sourced from US suppliers when possible. Each board is tested on a real DPS-1200FB A under full load, for quality control before it is shipped to you. I would expect nothing less, so I give nothing less!
The board has 5 main switches and indicators:
SWITCH 1 -
BUTT SIMPLE:
ON or OFF!
4 pin standard PC Fan Header to supply +12V and ground for turning the supply On remotely
2 pin Header to supply +12V and ground to next board or for remote sensing
Yellow/Amber LED
- STDBY
Green LED
- Power Supply ON
** Contact us for quantity pricing **
Payment and Shipping:
The buyer should make a Paypal payment within 1 day of purchase. Once a confirmed payment is received, the interface board will be shipped using USPS Priority Mail with tracking. Combined shipping discount is provided for multiple interface boards to be sent to the same location.
I also accept Bitcoin as payment! The final BTC price that includes final value and shipping is based on the Coinbase conversion rate. For Bitcoin payment, the payment must show as pending in my wallet within 2 hours of invoice. Contact me prior to purchase to arrange payment.
International sales proudly supported via the eBay Global Shipping Program!
Please provide 5 star feedback, and if for any reason you feel we have earned less than 5 stars, allow us a chance to resolve the issue.
If for any reason you are dissatisfied, please contact us immediately.
Please contact me with any questions!!
Official PayPal Conversion Rates
Add
Currency Converter
To Your Items