AnaTek Blue ESR/Low Ohms Meter - Fully Assembled

Description

The AnaTek Blue ESR/Low Ohms
Meter
is the latest and best Bob Parker design and successor to the famous Dick Smith ESR/Low Ohms Meter. This fully assembled
tester is
handy and and measures capacitor equivalent series resistance (ESR) in-circuit. ESR is a very important characteristic of capacitors greater than 1 uF. This meter makes measurements which are often impossible to check with capacitance meters. Also great for measuring very low values of resistance. Supplied fully assembled, tested and calibrated with a 1yr factory warranty.
See manual for more details. It has quality flex test leads with banana plugs and alligator clips included
. This is an indispensable piece of test equipment for a system designer or product technician!
Please note : We are sorry but eBay has decided to take out all external links so for access to information/comparisons
please
goto anatekinstruments.com
E
SR Meter Features:
Supplied in Fully Assembled with
manual online
.
Two foot leads made with super flexible test lead wire with 4mm banana plugs
Test lead resistance compensation, improves measurement accuracy
Wide resistance measurements from 0.01 Ohm to 99 Ohm.
Automatic power off when reading is unchanged for 3 minutes
Low battery voltage warning
Easy-to-read, high brightness 0.5 inch (13mm) piercing blue LED display
Easy to read chart of good capacitor ESRs on the front panel with capacitor voltage values from 10V-450V, 1->10,000uF capacitance
Test ESR on polarized and non-polarized capacitors with the value of >1 uF
Measures ESR for capacitors in circuit, ideal for PCB level de-bug
Can also be used to test the low resistance grounding of ANSI/ESD S20.20, ANSI/ESD S6.1, ESD TR20.20 and compliance verification for grounding systems
Assess health for alkaline and rechargeable batteries
Operational down to 5.5v battery voltage, maximizes battery life
Standard 9 volt battery included
Built in Silicon Valley, California, USA
See here for the
comparison of some ESR meters
out on the market today,
our
Discussion forum
for advice on operation and de-bug and
Bob Parkers Hints
in the use of the ESR meter.
See our
Pinterest
page for pins on Capacitor testing and ESR tester reviews.
For more info see the
Anatek BESR datasheet
and
Video
.
View a great
informational page
created by a satisfied customer and
some independent reviews of the Blue ESR/Low Ohms Meter from
Circuit Spot
,
Capacitor Lab
and
eHam
. Also some
great repair videos on
Dave's TV Repair
page.
Our Malaysian distributor has also published an excellent
tutorial on how to
get
the most from your ESR meter.
From our Past Customers on the Web:
"Works well. I ordered tweezers for making it easier to test on board components. Even without the tweezers, this esr meter is easy to use with an easy to read chart on the front" G. Michael Phillips
"I am heavily involved with repairing and building vacuum tube amplifiers and use this piece of test equipment regularly. Great device! Kar M. Sandoval
"I'll tell you why I DO feel lucky, and that's having purchased from someone who still understands the meaning of customer service! That goes a long way in my book (well, if I had a book.)" Todd
" I am extremely happy with the purchase. It quickly determines the good or bad status of caps and would recommend its purchase. It will be worth the price the first time you diagnose a clean looking cap that is in fact internally damaged" Dan A Peterson
"I use a "Blue ESR Meter" which works great for testing ESR in circuit, as well as battery health, such as AA alkaline and re-chargeables. I found it's accuracy to be close to that of a Sencore analyzer with a 5 digit price tag" ThatOneGuy
Saw Uncle Doug using this on YouTube and thought I should get this as I had an old Fender amp I was restoring. This is the tool to have for checking old electrolytic capacitors. James C.
Very useful to identify bad capacitors that otherwise would not be detected. If you repair or work with vintage electronics you need this. Mark M.
Works well. I ordered tweezers for making it easier to test on board components. Even without the tweezers, this esr meter is easy to use with an easy to read chart on the front. Mike Phillips
I purchased my esr meter about a year ago and have used it from time to time and have yet to replace the battery. My guess is that battery usage would be similar to that of a typical ohm meter. I am extremely happy with the purchase. It quickly determines the good or bad status of caps and would recommend its purchase. It will be worth the price the first time you diagnose a clean looking cap that is in fact internally damaged. Dan A Peterson
Also see the companion
Blue
R
ing
T
ester
for FBT/LOPTs and Hi-Q inductors.